Leave Your Message
News Categories
Featured News

Hydraulic Cooling Solution

2024-07-23 10:58:22

With the arrival of the hot summer weather, we are receiving more and more requests from customers for hydraulic station tank cooling. With the hot weather still here for a while, we are here to share some ideas on cooling hydraulic systems.


First, let's clarify where the heat is coming from.

We know that the actual operating hydraulic system has power losses. In simple terms, there is a difference between the energy put into the system and the available power output. The power is not actually "lost", this part of the lost energy is just converted into another unusable energy - heat. No matter which country or region, as long as the temperature is too high, we are all concerned about the problem of oil temperature overheating. Without a matching hydraulic cooling system, the system can easily fail the molecular structure of the fluid. Overheating can also damage components such as seals, which play a vital role in the operation of machinery.


Next, let's start with the type of cooling system.

In general, cooling systems either use air as the cooling medium or water. Traditional cooling solutions usually have natural air cooling or heat exchange through water as the medium.Air as a cooling medium is always available and free, but it is greatly affected by the ambient temperature.In contrast, water cooling systems, although quiet, rely on a large supply of clean cooling water and are prone to corrosion. Unlike the above cooling solutions, TOBEL has been researching forced cooling equipment for 17 years, developing and manufacturing industrial air chillers that use compressor forced cooling and environmentally friendly refrigerants, which we call air-cooled hydraulic oil chillers. The oil chiller can control the hydraulic oil temperature within ideal range, there is no need of water, and easy to install and maintain.


Finally, get the best results from your cooling system.

You can provide us with as much information as possible about the hydraulic system, and our technical team will provide the most suitable oil cooling solution according to the working condition of the equipment and the ambient temperature.

 

Parameter

Hydraulic machinery

Machine type/working condition  
Oil volume(L*W*H)mm  
Motor power(KW)  
Pump flow(L/min)  
Pressurized frequency(t/min)  
Max working pressure (Mpa)  
Temperature changes in an hour(℃)  
How many degrees do you want the temperature to drop from?  
Is it a servo hydraulic system?  
Ambient temperature(℃)
 

At TOBEL we have rich cooling experience in hydraulic system. Just give us a demand to better understand TOBEL, understand our products, we can provide you with a satisfied cooling solution for selection.

aimgodc